Basic Specifications & Features |
| Part Number |
HDD2144 |
| Formatted Capacity |
6,007 Mbyte |
| Form Factor |
2.5 Inch |
| Interface Type |
ATAPI/IDE |
| Interface Standards supported |
ATA-2
ATA-3
ATA-4 |
| Head/Actuator Technology |
"Ramp-Load" Technology
GMR Head |
Physical Parameters |
| Number of Cylinders |
15,200 |
| Number of Heads |
2 |
| Number of Platters |
1 |
| Bytes/Sector |
512 |
| Shock Detection |
Shock sensor circuit |
| SMART |
The SMART command set is supported. |
Performance Specifications |
| Average Seek Time |
13 ms |
| Maximum Seek Time |
24 ms |
| Track-To-Track Seek Time |
3 ms |
| Internal Transfer Rate |
From 104.35 to 193.88 Mbit/s |
| Host Transfer Rate |
| PIO Mode |
PIO Mode 4 (16.6 Mbyte/s) |
| UDMA Mode |
UDMA Mode 4/66 (66.6 MByte/s) |
| Rotational Speed |
4,200 rpm |
| Buffer Size |
1,024 Kbyte |
| Cache |
Read-Ahead Cache
Write Cache |
Reliability Specifications |
| Error Rate |
| Seek Error Rate |
1 error per 10^6 seeks |
| Non-Recoverable Error Rate |
1 error per 10^13 seeks |
| MTBF |
300,000 Hours |
| Power On Hours |
2,800 Hours |
| Product Life |
5 years or 20,000 POH (whatever comes earlier). |
| Preventive Maintenance |
No preventive maintenance is required. |
External Dimensions |
| Width |
69.85 mm |
| Height |
9.5 mm |
| Depth |
100 mm |
| Weight |
0.099 kg |
| Drive Orientation |
The drive can be installed in all axes (6 directions). |
| Mounting Instructions: Screwing |
Four screws should be tightened equally with 0.3 Nm torque. The depth should be 3.0 mm min. and 3.5 mm maximum. |
