A Perfect Guide to the Tank Installation Process

Denver is a beautiful city seated in the heart of Colorado. In more ways than one, it is the heart of Colorado. With the Colorado River as its primary water source, Denver has a vast spread of private wells and tanks to fulfil the city’s water demands.

Whether you are using it for domestic processes or large buildings and campuses, water tank installation in Denver, CO is a crucial process that has to be done right. Efficient use and distribution of water depend on it.

While installing a tank, you have to keep a few things in mind and use the best practices. Read on to find out what they are.

Things to Consider Before Tank Installation

The installation of your tank depends heavily on the purpose it will serve. The most common uses of water tanks are:

  • Harvesting rainwater
  • Garden and lawn watering
  • Livestock rearing
  • Supplying water for domestic chores

Most, if not all, of these uses, involve collecting, storing, and distributing water. Hence, installing the tank at a high point where it has easy access to water sources and can distribute water efficiently is preferable.

The tank’s purpose will also determine its capacity and frequency of use.

A step-by-step process

Installing water tanks can be an easy process. This step-by-step guide is sufficient for tank installation in Denver, CO for small-scale uses.

Step 1: Prepare the base

The base is the surface on which your tank will sit. It can be of two types: concrete and compacted material.

  • Concrete Base: A 3″ thick layer of concrete is poured over a compacted soil base to create a slab. It is very stable and has excellent support for your water tank.
  • Compacted Base: A pad of 3” is created underneath the tank. It is made using crushed dust or road. It is much larger in diameter as compared to the tank.

In either case, the base should be even and flat. This is done to keep the water tank on it stably.

Step 2: Fit overflowing drainage pipe

Piping should be connected from the fitting and taken to either the storm water drainage system or somewhere away from the base. Since there will be water flowing through the drainage pipe, it can undermine the stability of the base. Thus, it has to be kept away from the base.

Step 3: Installing the fill pipes

These are the final delivery pipes that will run around the building. The pipe usually goes from your roof to the cover of the water tank. Its water is ideal for domestic chores, gardening, and livestock.

If you wish to use it for water, however, you should talk to your vendor regarding what water filters.

Final words

Water solutions in Denver are efficient. It is also easy to find many professional services to help you in water tank installation in Denver, CO.

Tanks also have a lifetime, after which they have to be replaced. They reach this expiry faster if they are used in sites where consumption is more.

Hence, many services also work with tank removals and site closing. This helps safely remove the tank without much damage to the base or piping.

For large-scale uses, the tanks are often large and installed underground. This helps in meeting the requirements more efficiently.